Manual

16
DISASSEMBLY OF THE BOLT CARRIER ASSEMBLY
1. Remove the firing pin retaining pin by pushing it through until it can be
gripped and pulled out. Remove the firing pin by sliding it out of the rear of
the bolt assembly. Remove the cam pin by lifting up. Pull the bolt
assembly from the bolt carrier. (Figure 20).
Figure 20. Bolt Carrier Assembly
DISASSEMBLY OF THE BOLT
Note
Disassemble the extractor and spring assembly only when dirty or damaged.
1. Use a pin punch to remove the extractor pin. (Figure 21). Applying
pressure to extractor will aid in removal of extractor pin. Be aware that the
extractor spring and extractor are in tension.
2. Remove the extractor and spring. (Figure 22).
Figure 21. Figure 22.
Note
Bolt and extractor illustrated here may not reflect your configuration.