Manual

14

DISASSEMBLY AND ASSEMBLY
This rifle disassembles into two primary assemblies:
1. The upper assembly (Figure 14).
Figure 14.
2. The lower assembly (Figure 15).
Figure 15.
Separating the Upper and Lower Receivers
1. Ensure rifle is unloaded and clear by following the steps in the previous
section. With the safety on and bolt closed (Figure 16), push the takedown
pin (rearward most pin) until it clears its detent then pull it until it stops.
Push the pivot pin (forward most pin) until it clears its detent then pull it
until it stops. (Figure 17). Separate the upper and lower receivers.
Figure 16 Figure 17