Safety Guide

BREECH CONVERSION KIT
6
INSTRUCTIONS
1. Lift the bolt handle then pull the bolt toward the rear of the
rifle. Depress and hold the receiver latch, (FIGURE 3) located
on the underside of the lower receiver just behind the pistol
grip.
2. Pivot lower receiver away from upper (FIGURE 4). Remove the
bolt assembly, rear bolt guide and front bolt guide from the
upper receiver.
.96
1.11
FRONT AND REAR BOLT GUIDES
FIGURE 2-2
FIGURE 3
RECEIVER LATCH
LARGE BREECH
SMALL BREECH
NOTE: THIS ASSEMBLY WILL NOT BE USED AFTER RIFLE IS
CONVERTED TO THE SMALL BREECH SYSTEM.