Manualshelf

Operator's Instructions

ManualsBrandsBarrett ManualsFirearmsMRAD Barrel Conversion Kit
12345678910
barrett.net
7
5. Carefully release the bolt body upward. Rotate the cocking piece
shroud counter clockwise about 120 degrees and withdraw from the
bolt body (FIGURE 5).
BOLT BODY
COCKING PIECE SHROUD
FIGURE 5
A
B
DO NOT REMOVE THE BOLT DISASSEMBLY TOOL FROM THE COCKING
PIECE WHILE THE FIRING PIN ASSEMBLY IS REMOVED FROM THE
BOLT BODY. THE FIRING PIN SPRING IS UNDER HEAVY LOAD.
WARNING
6. Using a punch or other pointed object, push the bolt pin out of the bolt
body. Note that the bolt pin may only be removed or inserted from the
top of the bolt body. Remove the bolt head from the bolt body.
FIGURE 6
BOLT HEAD
BOLT HEAD