Operator's Instructions

BARREL CONVERSION KIT
6
2. Loosen the two barrel screws using a T-30 Torx wrench and remove
the barrel from the upper receiver (FIGURE 3).
3. With the searing edge firmly seated against a hard surface, pull
downward on the bolt body to expose the two slots in the cocking
piece (FIGURE 4).
4. Insert the bolt disassembly tool into the two slots to retain the
cocking piece (FIGURE 4).
FIGURE 4
SEARING EDGE
BOLT CARRIER DISASSEMBLY TOOL
HARD EDGE
BOLT BODY
FIGURE 3