Operator's Instructions

barrett.net
5
Given that barrel conversion kits may be purchased within the same
letter group, each barrel and bolt are marked with serial numbers.
Every barrel and bolt are paired at the factory. To avoid mismatching
parts, please record your barrel and bolt numbers below and store this
document for reference:
Barrel number: Bolt number:
MRAD BARREL CONVERSION KIT INSTRUCTIONS
Visit barrett.net for installation videos for this product.
1. Lift the bolt handle then pull the bolt toward the rear of the rifle.
The handle must be in the up position before the receivers can
be unlatched. Depress and hold the receiver latch, located on the
underside of the lower receiver just behind the pistol grip (FIGURE 1).
Pivot lower receiver away from upper. Remove the bolt assembly
from the upper receiver (FIGURE 2).
FIGURE 1
FIGURE 2
RECEIVER LATCH