User's Manual Part 1

76 of 285
Using the Scroll keys select step increment required in Hz (Steps
available 100 Hz (0.1 kHz), 250 Hz (0.25 kHz), 1000 Hz (1 kHz),
2500 Hz (2.5 kHz) (example shown 2500 Hz)
then press the key
Using the Scroll keys select step speed in milliseconds. (steps
available 100 mS, 250 mS, 500 mS, 1000 mS (example shown
250 mS)
then press the key
Start Receiver Scanning
To start receiver scanning, enter the tuning receiver mode, then:-
press the key
The receiver will now be scanning using the last entered
parameters.
The receiver will now be scanning using the entered parameters.
The transceiver will halt scanning for the following reasons:-
Signal Strength Level (SSL) mute is selected and a signal with a level
greater than the pre-set threshold is received.
Audio (syllabic) mute is selected and a voice signal is detected