User's Manual Part 1

49 of 285
Hang Up Call
When a call to a telephone interconnect base station has been completed the caller
should "hang up" by sending a “hang up” code:-
press the key
select “Hang up” with the scroll keys
then press the key
select the ID of the telephone interconnect that you are connected
through
then press the key
When the hang up Selcall has completed transmitting, listen for hang up revertive
signal, confirming the “hang up” was successful, if not heard repeat the above
procedure.
Note:- If the hang up call is unsuccessful for any reason the telephone interconnect
will time out and hang up itself.