User's Manual Part 1

32 of 285
Default Self IDs
Default self IDs are the IDs used when making a selective call. They are used when the
self ID is not set during the call procedure or the Selcall address book entry being used
does not have a self ID attached to it. These IDs are also used when making calls via the
RS232 control command set.
Setting Default Self IDs
then press the key.
Use the scroll keys to select the self id to attach to the default ID (in this
case the 4 digit OEM defalut ID)
then press the key.
Repeat the steps above for each default ID.