User's Manual Part 1

169 of 285
To Commence Scanning
Note:- You should have selected the required scan list before you commence
scanning, refer to the section “ALE scan list select” in the ALE protected menu.
Press the key
the PRC-2090 transceiver will now be ALE scanning and ready to
accept ALE calls, receive “Soundings” and transmit “Soundings”
(If “Sounding” is enabled on your transceiver)
During ALE scanning the following messages may be displayed:-
This occurs when your station receives an ALE sounding from
another station in the network.
This is displayed when your station transmits a “sounding”
Note:- Your station would have to have “Sounding” enabled.