User's Manual Part 1

149 of 285
Receiver Audio Path Configuration
Used when PRC-2090 is fitted into the PRC-2090 Base docking station
The section sets where the unprocessed receiver audio in the transceiver is
sourced. Normally this is set to internal; in this case the transceiver’s receiver
provides the unprocessed audio.
When used with a remote receiver, in split site operations, it can be set to external,
in this case unprocessed receive audio from the remote site can be input into the
auxiliary sockets 600 ohm balanced audio port.
Use the Scroll keys to select setting required (example shows
“External audio”):-
press the key