Specifications

22
Using the Reset Button to Reset the LAN IP address
The Barracuda SSL VPN is assigned a default IP address of 192.168.200.200. You can
change this IP address using the Appliance Administrators Interface (Basic > IP
Configuration) or by pressing the RESET button on the front panel.
Pressing RESET for five seconds sets the LAN IP address to 192.168.200.200.
Pressing RESET eight seconds changes the LAN IP address to 192.168.1.200.
Pressing the button for 12 seconds changes the LAN IP address to 10.1.1.200. You will
notice the three LEDs on the front panel flash at the same time intervals.