Specifications

100
Configuring Windows Explorer Drive Mapping
A number of configuration properties can be accessed from Management Console > System
Configuration > Windows Integration > Drive Mapping and are detailed below.
• Debug: Enable debugging for drive mappings. This should only be set if asked by a
Barracuda Central engineer.
• Debug Flags: Flags for the above debug option.
• Streaming Threshold: The size at which files are streamed. Streaming maintains an open file
on the remote filesystem. A zero value means files are always streamed.
• Always Stream Files: The file extensions that should always be streamed.
• Never Stream Files: The file extensions that should never be streamed.
• Block Size: The block size used when reading data from the remote file system. Altering this
value can affect the efficiency of file access and the default value should be ample for most
environments.
• Block Timeout: The number of seconds before a timeout exception is thrown when reading
streamed blocks of data from the remote file system. A timeout exception will cause
unexpected results and as such this setting is only used when the remote file system becomes
unresponsive. It is not recommended that you change this value unless instructed to do so by a
Barracuda Central engineer.
• Total Size: The total amount of disk space displayed for a drive's volume information
• Free Size: The amount of free space displayed for a drive's volume information
• Size Format: The format to use in a drive's volume information