System information

1.
2.
3.
4.
Implementation Prerequisites
You will need configuration Access to the Exchange environment, and the ability to make firewall changes, if deemed necessary.
To use push journaling, you must create a mailbox store.dedicated
Physical Installation and Console Configuration
Physically install the Barracuda Message Archiver using the following steps:
Fasten the Barracuda Message Archiver to a 19-inch rack or place it in a stable location.
Connect an Ethernet cable from the network switch to the Ethernet port on the back of the Barracuda Message Archiver.
Connect a standard VGA monitor, PS2 keyboard, and an AC power cord to the Barracuda Message Archiver. Press the button onPower
the front panel to turn the unit on.
Log into the console using , and configure the , andadmin/admin IP Address, Subnet Mask, Default Gateway, Primary DNS Server Se
as appropriate for your network:condary DNS Server
Firewall Ports
If the Barracuda Message Archiver is located behind a corporate firewall, open the following ports on the firewall to ensure proper operation:
Port Direction TCP UDP Usage
22
Out Yes No Remote diagnostics and
service recommended
(1)
25
Out Yes No Email and bounces (25
inbound may be
necessary for some
deployments)
53
Out Yes Yes Domain Name Service
(DNS) recommended
Microsoft recommends placing the Exchange Mailbox Store containing the journaling mailbox on a drive that does not hold user
mailboxes. For more information, see the Microsoft Support article Troubleshooting message journaling in Exchange Server 2003 and
.in Exchange 2000 Server