System information

Default (Barracuda Networks);
Private (self-signed);
Trusted certificate - a certificate signed by a trusted certificate authority (CA).
Specific steps for configuring SSL certificates is described in the section .Enabling SSL for Administrators and Users
Track Changes to the Configuration and User Login Activities
The syslog function of the Barracuda Message Archiver provides two kinds of logs, capturing:
User login activities and any configuration changes made on the device;
Data related to mail traffic. This data is the same information as that used to build the Message Log in the Barracuda Message Archiver.
From the page, use the button to view the mail syslog output.ADVANCED > Syslog Monitor Syslog
Backup and Storage
In this Section
Storage Backup
Storage Manager
Related Articles
Configuration Backups
Storage Backup
This article refers to the Barracuda Message Archiver release 3.1 or higher.
In this article:
Backup of Archives
NFS Shares
SMB Access
Desktop Backups
Automated Configuration Backups
The Message Store of the Barracuda Message Archiver should be backed up just as you would back up your data on any other data storage
device. Data is stored on the share in files of about 1GB in size. Be aware that although you can back upAll files in all shares must be backed up.
the files, you must contact Barracuda Networks Technical Support in order to restore any of the data.
Backups can be saved to any FTP or SMB location to which the Barracuda Message Archiver has access. To create internal storage volume
backups, you can enable Show Local Backup Options on the page to display the backup options.ADVANCED > Backup
Backup of Archives
In the section, you can enable NFS or SMB access to the message store, and create local storage backups. For moreBackup of Archives
information, refer to .Archived Data Backup
The Message Store can be made available as an NFS or SMB share on your network. Provide the following information to enable any share:
Expansion Storage is available only on Barracuda Message Archivers shipped prior to May 15, 2013. See for furtherStorage Details
information.
For backups via SMB, the username used to connect to the published SMB share is always , but you can optionallysmb
specify a workgroup name and an access password.
When publishing the data partition via NFS, please contact for assistance in restrictingBarracuda Networks Technical Support
access to the NSF share by IP address.