System information

complete, the login page appears.
Update Definitions
To apply the newest definitions provided by Energize Updates:
1. Go to the page.ADVANCED > Energize Updates
2. Set to . The recommended setting is for all available definitions.Automatic Updates On On
3. Verify the current version is the same as the latest general release. If the rules are not up-to-date, continue to the next step, otherwise definition
update is complete.
4. Click to download and install the latest available definitions to the Barracuda Message Archiver.Update
Continue with .Step 4: How to Configure Administrative Settings
Step 4: How to Configure Administrative Settings
This article refers to the Barracuda Message Archiver release 3.1 or higher.
Before configuring administrative settings, complete .Step 3: How to Configure the Web Interface
In this article:
Set Administration Interface Access
Set the System Time Zone
Customize the Web Interface Appearance
Enable SSL for Administrators and Users
Related Articles
Understanding SMTP Forwarding and Trusted
Servers
Set Administration Interface Access
The page is where you perform the following tasks related to Barracuda Message Archiver web access:BASIC > Administration
Change the password of the administration account .admin
Change the port used to access the Barracuda Message Archiver over the web (default is port 8000).
Change the length of time after which idle users are to be logged out of the web interface (the default value is 20 minutes).
Specify the IP addresses or netmask of the systems that can access the web administration interface. Attempts to log in as admin from
other systems are denied.
Specify the IP addresses or netmask of the systems that can communicate with the Barracuda Message Archiver via SNMP (available on
Barracuda Message Archiver model 450 and higher).
Set the System Time Zone
You can set the time zone of your Barracuda Message Archiver from the page. The current time on the system isBASIC > Administration
automatically updated via Network Time Protocol (NTP). When the Barracuda Message Archiver resides behind a firewall, NTP requires port 123
to be opened for outbound UDP traffic.
It is important that the time zone is set correctly because this information is used in all logs and reports.
The Barracuda Message Archiver automatically reboots when you change the time zone.
Customize the Web Interface Appearance
The page allows you to customize the default images used on the web interface. This tab is available only on theADVANCED > Appearance
Barracuda Message Archiver 650 and above.
Enable SSL for Administrators and Users
Use the page to modify various settings related to SSL (https) access to the Barracuda Message ArchiverADVANCED > Secure Administration
web interface.