User`s guide

3.
1.
2.
3.
a.
b.
4.
a.
b.
c.
5.
6.
1.
2.
To configure the Barracuda Web Security Service on the Barracuda Firewall:
On the page, select NETWORK > Proxy Use Barracuda Web Security Service if connected (recommended).
To i , select the check box.nclude the user and domain name if available Include User Information
For local users, this information is retrieved from the Barracuda DC agent. For information on how to get, install, and configure
the Barracuda DC Agent, see About the Barracuda DC Agent.
For VPN users, the information comes from whatever authentication method is used.
To change this selection later, you must disable and then re-enable the Barracuda Web Security Service so that it registers your
change.
To redirect HTTP traffic to the Barracuda Web Security Service, create the required firewall rules.
Go to the page.FIREWALL > Firewall Rules
Edit and enable the pre-installed TRANSPARENT-PROXY and TRANSPARENT-PROXY-WIFI (if using Wi-Fi) firewall rules to all
.ow traffic to pass to the Barracuda Web Security Service
Complete the connection from the Barracuda Firewall to the Barracuda Web Security Service.
Go to the BASIC > Cloud Control page.
Verify that your customer account information is entered.
Enable Connect to Barracuda Cloud Control and save your changes. After a successful connection, a "Connected" status is
displayed.
Log into your Barracuda Cloud Control account again.
Click the tab and refresh the display. Some network activity appears. Web Security
How to Configure Barracuda Cloud Control
With the Barracuda Cloud Control service, you can centrally configure and manage multiple Barracuda Firewalls. When a Barracuda Firewall is
linked to Barracuda Cloud Control, it continuously synchronizes its configuration settings with the service.
To connect a Barracuda Firewall to Barracuda Cloud Control:
Go to the page and verify that your customer account information is already entered.BASIC > Cloud Control
Enable and click . After a successful connection, a "Connected" status appears,Connect to Barracuda Cloud Control Save Changes
indicating that this Barracuda Firewall can be centrally managed using Barracuda Cloud Control.
You do not have to edit any firewall rules.
For more information on Barracuda Cloud Control, see .Barracuda Cloud Control
Monitoring
The Barracuda Firewall incorporates hardware and software fail-safe mechanisms that are indicated via system alerts and logs. You can inspect
the logs to see what is happening with traffic. SNMP monitoring and traps are supported.
These articles describe the tools and monitoring tasks that you can use to track connections and system performance.