User`s guide

6.
7.
8.
1.
2.
3.
4.
5.
6.
7.
Remote Address
Enter .213.47.0.253
The WAN IP address of location 2.
Remote Networks
Enter ./2410.10.20.0
The .remote LAN
Specify these authentication settings:
Setting Value
Authentication Select . Shared Passphrase
Passphrase
Enter the shared secret.
Click .Add
Step 2. Create the IPsec Tunnel on the Barracuda Firewall at Location 2
To create the IPsec tunnel:
Log into the Barracuda Firewall at Location 2.
Go to the page.VPN > Site-to-Site Tunnels
In the Site-to-Site IPSec Tunnels section, click Add .
Enter a Name for the new VPN tunnel.
In the and sections, specify these settings:Phase 1 Phase 2
Setting Value
Encryption Phase 1 & 2 Select . AES256
Hash Method Phase 1 & 2 Select .MD5
DH Group Phase 1 & 2 Select .Group 1
Lifetime Phase 1
Enter .28800
Lifetime Phase 2
Enter .3600
Specify these network settings:
Setting Value
Local End Select . Passive
Local Address
Select one of the available IP addresses. If you have dynamic
ISPs configured, select .Dynamic
Local Networks
Enter ./2410.20.10.0
The network address for the locally configured LAN.
Remote Address
Enter .213.47.0.253
The WAN IP address of location 1.
Remote Networks
Enter ./2410.10.10.0
The .remote LAN
Specify these authentication settings:
Setting Value