Specifications

Barracuda Backup Server Network Interface Card
Use network interface card (NIC) bonding to increase available bandwidth:
Model Throughput Number of Interfaces
190 1Gb 1
390 1Gb 1
490 1Gb 1
690 1Gb 2
890 1Gb 2
891/892 10Gb 3
990/991 10Gb 3
1090/1091 10Gb 3
10 Gigabit Ethernet Card Option (Models 892, 990, and 1090 Only)
Models 892, 990, and 1090 include a 10 Gigabit Ethernet card. If your organization's environment does not support 10 Gigabit throughput, the
card reduces its speed to 1 Gigabit:
1 Gigabit Connection - Plug in a CAT5e cable for 1 Gigabit throughput.
10 Gigabit Connection - Plug in a CAT6e cable and a 10 Gigabit switch for 10 Gigabit throughput.
10 Gigabit Fiber Card Option (Models 891, 991, and 1091 Only)
Use a small form-factor pluggable (SFP) transceiver module:
SFP - Use SFP for 1/4 Gigabit/second throughput; you will need a multi-mode cable with LC connections or a direct attach cable.
SFP+ - Use SFP+ for 10 gigabit/second throughput (included); you will need a multi-mode cable with LC connections or a direct attach
cable.
Vendor-Specific SFP - If you are using a vendor-specific module in your environment, simply remove the Barracuda provided SFP and
replace with other vendor.
By default the top port is active. Contact if you wish to bond the two ports for 20 Gigabit throughput withBarracuda Networks Technical Support
failover capabilities.
Barracuda Backup Server Model 890, 990, and 1090 Drive Layout
Model 890 Drive Layout
Model 990 Drive Layout
Model 1090 Drive Layout