Specifications

5.
6.
7.
8.
9.
1.
2.
3.
4.
If the server has a different IP address, select the third option and enter the IP address of the new location:target
Click Start Restore .
Go to REPORTS > Restore to view restore job details.
Once the restore is complete, a dialog displays. Click to close the dialog box.OK
Once the restore job is complete, use the steps in the section to restore theRestoring Normal Boot Mode
server to normal mode.
Restore Normal Boot Mode
Once the restore is complete, use the following steps to restore the server to normal boot mode:
Power on the server, or if it is already running, reboot the server.target target
Log on using an administrator account; if the server is a domain controller, log in using a domain account with administrativetarget
access to the server.
At a command prompt, enter the following command:
bcdedit /deletevalue safeboot
Press , and then enter the following command to restore normal boot mode:Enter
shutdown -t 0 -r
Restore Job
The restore job completion is dependent upon the size of the original server.