Specifications

Click Start Restore. Once the restore is complete, go to REPORTS > Restore to verify the restore

completed successfully.

Configuring Replication

Any Barracuda Backup Server can data to another Barracuda Backup Server, however, only Barracuda Backup Servers 490send

and higher can act as a backup to other Barracuda Backup Servers.

For every Terabyte of data replicated, Barracuda Networks recommends a 1.5 Mbps or T1 connection.

In this article:

Before Starting Replication

Verify Retention Policies

Configure Destinations

Specify Data Replication Destination

Temporarily Disable a Destination

Remove a Destination

Loss of Communication

Replication

Site-to-Site Deployment

Setting Up Site-to-Site Replication

Before Starting Replication

Verify Internet connectivity between the local and remote Barracuda Backup Server(s). Configuring a secure VPN

connection between multiple Barracuda Backup Servers ensures the highest level of security possible.

Verify Retention Policies

Make sure that your retention policies are configured before configuring replication. Otherwise you may waste bandwidth copying data that does

not need to be replicated. On the Barracuda Backup Server, go to the BACKUP > Retention Policies page and verify

that the retention policies are configured before configuring replication to avoid copying data that does not need

replication.

Verify Internet connectivity between the local and remote Barracuda Backup Server(s). Configuring a secure VPN connection between multiple

Barracuda Backup Servers ensures the highest level of security.

Configure Destinations