FAQ

a sharp utility knife and bend gently.! BarnWood2GO will then be easier to cut
into the specific size you need.!
Q:! Can BarnWood2GO be applied to!a textured surface?
!
A:!!We recommend applying BarnWood2GO to a smooth, clean surface.!
Textured surfaces!can be sanded to create as smooth of a surface as possible.
Q:! Can BarnWood2GO!be installed over tile?
!
A:!!Yes, BarnWood2GO!can be installed over tile as long as the surface has been
cleaned and dried prior to installation. However, as with all adhesives, when
exposed to a moist surface it could potentially detach from the installation area.
Q:! Can BarnWood2GO be installed in an area with moisture?
!
A:!!Typically, it is recommended to install BarnWood2GO in a controlled
environment free from moisture.! However, if moisture or water exposure is a
concern of yours, allow the area to dry completely a day before installation and a
day after.! We then recommend that you seal BarnWood2GO!after installation..
Q:!!Is it safe to install BarnWood2GO!near or around a Fireplace?
!
A:!!Installing BarnWood2GO near or around a fireplace is very popular and
common. We recommend that you apply BarnWood2GO around or near a code
approved fireplace.! If there are any further questions/concerns, you should
contact your!local fire marshall for up to date code regulations.
Q:! Can BarnWood2GO be installed Outdoors?
!
A:!!This product is not intended for outdoor use.
Q:! How long will BarnWood2GO adhere to my surface?
!
A:!!BarnWood2GO is made with the highest quality materials, but we cannot
guarantee the life of the adhesive.! There are many factors that can can extend
or shorten the life of the adhesive such as relative humidity, improper installation,
damp surface prior to installation, a textured surface and many other variables.
Q:! Can I remove BarnWood2GO?