FAQ

A:!!Yes, BarnWood2Go can ship internationally, however, the customer is subject
to additional taxes, duties and custom fees.
Q:! Does BarnWood2GO need to acclimate prior to installation?!!
A: Yes, it is recommend that you allow BarnWood2GO to acclimate for at least
one week prior to installation. This will allow BarnWood2GO to adjust to your
environment.!
Q:! What is the best way to acclimate BarnWood2GO?
!
A: ! To ensure proper acclimation of your product, remove any shrink wrap and
cut the straps on the outside of the box. Open the box and allow the product to sit
in the room where it is to be installed. This is especially important if you are
installing BarnWood2GO in an area that may be exposed to more moisture or
heat, for example, near a kitchen back splash, bathroom or near a heat source.
Q:! Is BarnWood2Go a kiln dried product?
!
A:!!Yes, BarnWood2Go goes through a very detailed de-nail, kiln dried, sanded
and wire brushed process to be sure you are getting the best quality material.
Q:!!Is it normal to have holes or small cracks in my BarnWood2GO material?
!
A:!!Yes, it is perfectly normal to have holes and small cracks in your
BarnWood2GO.! This material is 100% authentic recycled wood!that has!been
masterfully restored from the remnants of vintage barns, historic buildings and
other aged structures.! Nail holes, knot holes and small cracks are part of the
unique beauty and genuine characteristics of!BarnWood2GO.
Q:! Can I cut BarnWood2GO?
!
A:!!Yes, as shown in the video on the "home" page.! You can cut BarnWood2GO
with a hand saw or miter saw as needed.
Q:! Can!BarnWood2GO be cut to fit in tight areas and around fixtures?
!
A:!!Yes, BarnWood2GO!is very easy to cut to fit into!tight spaces.! Just measure
the area you need using a!straightedge as a guide.! Then,!score the material with