Specifications

11
Servicing the internal
components of the rotator
1. Remove the accessory in use.
2. Remove the four screws securing the top to the
motor assembly.
3. Pull up firmly to remove the top from the unit.
4. Remove the four screws securing the top case
to the bottom rotator plate.
5. Replace defective components.
6. Reassemble in the reverse order using steps 4-
1.
Maintenance and Servicing
Warning
To avoid electrical shock, always dis-
connect from power supply before
maintenance and servicing. Refer ser-
vicing to qualified personnel.
Warning
The motor speed control disk is very
sharp — be careful to avoid it while
servicing.