Specifications

8
Unpacking
1. Remove the unit from its shipping container.
Ensure that the ultrafilter, UV lamp, feed and reject
tubing, final filter, sanitization cartridge and power
cord are removed form the packaging materials
before discarding.
Tubing Adapter Installation
The following instructions will apply when you need to attach a
piece of tubing to your EASYpure UV/UF during installation,
unless otherwise noted in the installation instructions. To make
tubing connections:
1. Completely disassemble the fitting. Refer to Figure
3 to familiarize yourself with the names of the
component parts.
2. Make sure the tubing is cut off reasonably square
and that no plastic burrs or ridges are present.
Unpacking and Installation
Figure 3: Typical Polypropylene Tubing Adapter Installation