Specifications

5
The Barnstead EASYpure UV/UF is a line-fed water
purification system designed to provide pyrogen-free, low
TOC reagent grade water that exceeds ASTM, Type I,
Type A and NCCLS Type I standards. It uses a three-
stage deionization process combined with UV oxidation,
a 10,000 molecular weight cutoff ultrafilter and a 0.2
micron filter to polish pretreated water (distilled, deion-
ized, or reverse osmosis) to produce pyrogen-free
(<0.005 EU/ml), low TOC (<2 ppb) water with a resistivity
of up to 18.3 megohms-cm. Water resistivity is continu-
ously sensed by a resistivity cell and displayed on a
digital display. The EASYpure UV/UF is designed to
automatically clean the ultrafilter by flushing water
through the filter for one minute every twenty-four hours.
This water is sent to drain.
General Use
Do not use this product for any purpose other than its
intended usage.
Introduction
Figure 1: EASYpure UV Front Figure 2: EASYpure UV Back
Drawoff Lever
Control Panel
Filter/Bell
Assembly
Pump Interlock/
Pump Protector
Receptacle
Main Power
Switch
Power Cord
Receptacle
Door Latch
Feedwater Inlet
Reject Water
Outlet