Specifications

15
Pressing the Flush switch twice will initiate a five minute
flush of the ultrafilter. During this five minute flush, water
is sent to drain through the reject tubing, the Manual/
Extended Flush LED will flash, and the display will be
dark. After the timed flush has ended, the EASYpure UV/
UF will return to the Mode (Off, Run or Standby) it was in
when you initiated the flush. We recommend that you
initiate a one minute manual flush when starting up the
EASYpure UV/UF prior to your day’s work.
Display
When the EASYpure UV/UF is in run mode, the display
indicates the purity (in megohms-cm) of the water
available for draw off. When the EASYpure UV/UF is in
Standby mode, the display will be dark and the Standby
LED will be lit. When the EASYpure UV/UF is in a Flush
mode, the display will be dark and the Manual/Extended
Flush LED will be either lit (indicating a one-minute flush)
or flashing (indicating a five-minute flush). During an
Automatic Flush, the Automatic Flush LED will be lit. If
the display indicates anything else, see the Trouble-
shooting section of this manual.
CONTROLS