Instruction manual

EASYpure II RF 1-1Thermo Scientific
Section 1 Safety Information
Your Thermo Scientific EASYpure® II Reservoir Feed (RF) has been
designed with function, reliability, and safety in mind. It is the user’s
responsibility to install it in conformance with local electrical codes. For
safe operation, pay attention to Notes, Cautions, and Warnings
throughout the manual.
This manual contains important operating and safety information. The
user must carefully read and understand the contents of this manual prior
to the use of this equipment.
Water purification technology employs one or more of the following:
chemicals, electrical devices, mercury vapor lamps, steam and heated
vessels. Care should be taken when installing, operating or servicing
Thermo Scientific products. The specific safety notes pertinent to this
product are listed below.
Warnings
To avoid electrical shock, always:
1. Use a properly grounded electrical outlet of correct voltage and current
handling capacity.
2. Do not place your EASYpure II RF directly over equipment that
requires electrical service. Routine maintenance of this unit may
involve water spillage and subsequent electrical shock hazard, if
improperly located.
3. Replace fuses only with the same type and rating of fuse.
4. Do not disassemble water lines or remove catridges where spilled water
could contact equipment that requires electrical service. Electrical
shock could result.
5. Disconnect from the power supply prior to maintenance and servicing.