Instruction manual

8-2 EASYpure II RF Thermo Scientific
Section 8
Normal Operation
Feedwater
Replenishment
As water is drawn off from the EASYpure II RF, the feedwater reservoir
will require refilling. This will be indicated by a low water level in the sight
gauge or by the message “Add” on the display. To refill the reservoir:
1. Remove the Ventgard cap. Do not allow water to enter the Ventgard
cap.
2. Carefully pour pretreated feedwater into the feedwater reservoir until
the water is level with the top of the sight gauge. Replace the Ventgard
cap.
3. Allow the water’s resistivity to rise to the desired purity before drawing
off water.