Specifications

7
Dimensions and Clearance Requirements
EASYpure II LF dimensions: 12 " W x 17 1/8" H x 19" D (30.5 cm x 43.5 cm x 48.3 cm).
Clearances:
Right side - 11" (27.9 cm) minimum for cartridge removal.
Left side - 12" (30.5 cm) minimum.
Above - 12" (30.5 cm) minimum for removal of the top cover.
Electrical Requirements
The EASYpure II LF is equipped with two power cords and corresponding fuses taped to each power cord to
be plugged into a grounded electrical outlet of the appropriate voltage.
Model D7381 - 100-240 VAC +5%, -10% at 47-63 Hz.
Feedwater Requirements
The EASYpure II LF requires water pretreated by either distillation, deionization or reverse osmosis
meeting the following criteria:
TOC: Less than 1.0 ppm.
Turbidity: 1.0 N.T.U. maximum
Temperature: 40°F - 104°F (4.4°C - 40°C)
TDS:
RO - Less than 50 ppm as CaCO
3
DI - Less than 10 ppm as CaCO
3
Distilled - Less than 2 ppm as CaCO
3
Pressure Range: Gravity feed to 100 psig (7 kg/cm
2
) maximum.
Flow Rate: Greater than 0.26 gpm (1.0 lpm) at positive pressure.
Feedwater Source: to connect 1/4” NPT fitting with 10’ of 3/8” O.D. tubing provided
Product Water
Quality
Resistivity: Greater than 18.0 MΩ-cm (Conductivity less than .055 µs/cm)
TOC: 5-10 ppb
Flow rate
0.29 gpm (1.1 lpm) maximum at minimum inlet feedwater pressure of 30 psig (2.1 kg/cm
2
) and with a new
D3750 final filter.
Bacteria: Less than 1 CFU/mL
General Specifications