Specifications

28
Warning
Replace fuses with those of the same
type and rating.
Fuse Replacement (See Fig. 8)
1. Turn off the EASYpure II LF and disconnect it
from the power supply. Remove the power cord.
2. Pull out the fuse drawer located in the power
entry module.
3. Remove old fuses and replace with fuses of
the same type and rating. (See Consumables
section.)
4. Replace fuse drawer on left side of unit.
5. Reattach the power cord and reconnect the
unit to the power supply.
6. Operate normally.
Unit Shutdown
If the EASYpure II LF will be inactive for a period up to a
month, place the unit in Standby. For periods of time
greater than a month, disconnect water and power
sources, drain unit, close customer supplied water valve,
and remove and discard cartridges and final filter. See
Sanitization, Cartridge Replacement and 0.2 Micron
Final Filter Replacement sections for reactivation.
MAINTENANCE AND SERVICING