Specifications

Problem Possible Causes Solutions

0.2 micron final filter clogs EASYpure LF contaminated Sanitize EASYpure LF according

rapidly after replacement. with bacteria. to the instructions in System

Sanitization. Replace the 0.2 filter

assembly as indicated in the 0.2

Micron Filter Replacement section.

Short cartridge life. Cartridges being used are beyond Check the expiration date. Cartridges

expiration date begin to lose capacity after being

stored two years from the date of

manufacture. Replace the cartridges

with unexpired ones.

Change in feedwater characteristics. If a Barnstead ROpure is the

feedwater source, check that the

membrane is functioning properly.

If a Barnstead Still is the feedwater

source, ensure that the distillate

temperature does not exceed 120°F

when added to the EASYpure LF

feedwater reservoir.

If feedwater is from a central water

purification system, verify water

quality and proper functioning of the

system.

Water leakage inside Cartridge connecting tubing not Press connecting tubing firmly into

EASYpure LF. fully seated into sockets. sockets.

Missing or defective cartridge Install or replace cartridge

O-rings. O-rings.

TROUBLESHOOTING