Specifications

14. Reinstall the cell into the cell well and hand tighten.

Reroute the cable up through the housing and recon-

nect.

15. Reinstall the screw holding the cell-cable retaining

clip. Reinstall membrane switch lead. Replace the

front cover. Retape the Luer fitting with new Teflon

tape and reinstall fitting. Replace the top cover.

16. Reconnect the power cord and the pump interlock

plug to the unit, and reconnect the unit to the power

supply. Connect incoming water line at quick discon-

nect.

Shutdown

If the EASYpure LF is to be shut down for an extended pe-

riod of time, the unit should be completely drained and the

cartridges removed to prevent the growth of bacteria.

If the system has remained inactive and full of water for

more than 96 hours, the unit should be drained, sanitized

and new cartridges installed prior to use.

MAINTENANCE AND SERVICING