Specifications

15
Installing Float or Pressure
Switch
Accessories D0606 (float switch) and D2706 (pressure
switch) are designed to protect the EASYpure LF pump
by alerting the EASYpure LF of an inadequate feedwater
condition so that the pump can be shut down. Use the
following instructions for installation.
1. Disconnect electrical power.
2. If using D0606 float switch, follow the installation in-
structions included with the float switch for installa-
tion to tank.
3. If using D2706 low pressure switch, install the PVC
tee (supplied with D2706) in incoming water line.
Screw the switch into the top of the tee, then con-
nect the inlet tubing to the EASYpure LF with the
remaining opening.
4. Route cable from float or low pressure switch to the
rear of the EASYpure LF.
5. Remove jumper plug and save for future use.
6. Plug cable into jumper plug outlet.
7. Reconnect electrical cord.
Installing Float or Pressure
Switch
Figure 6 Float and Pressure Switch Installation