Specifications

9. Install the four screws removed in step 7 through

the bottom of the wall bracket and into the

EASYpure LF.

10. Snake the tubing removed in step 4 through the

hole in the EASYpure LF floor and the wall bracket

and attach it to the quick disconnect body installed

on the side of the bracket.

11. Installing feed tubing from the water source to the

quick disconnect body on the outside of the bracket

cannot be done until cartridges have been installed.

You will connect the water supply to the quick dis-

connect body in the Initial Operation section of this

manual.

12. Replace the EASYpure LF cover.

13. Reinstall the pump interlock plug.

Figure 4 Orientation of Swivel Base

NOTE

Ensure there are no kinks in the tubing that could

restrict water flow.

NOTE

Outlet of feedwater storage tank must be above or

at the same level as the inlet valve on the

EASYpure LF.

WALL MOUNTING