Specifications

Remote Dispenser Wall Bracket Mounting
1. Determine location of bracket in relation to
EASYpure II UV/UF. Using the wall bracket as a
template, locate and drill the mounting holes in the
wall. Install appropriate fasteners (customer sup-
plied) into wall.
2. Slide bracket onto fasteners and secure
3. Mount dispenser onto bracket as shown.
Water Service Connections
Atmospheric Drain
When the EASYpure II UV/UF flushes its membrane, the
water used is sent to drain through this connection. To
install:
1. Locate the drain water tubing. This is the 1/4” O.D.
tubing that is approximately 6 ft. long with a 1/4”
O.D. x 1/4” N.P.T. tubing adapter on one end. The
atmospheric drain fitting is located on the lower left
side of the EASYpure II UV/UF.
19
I
NSTALLATION
Fuse Holder
Power Entry Module
Cord Socket
Optional Remote
Dispenser Connections
Feedwater Inlet
Atmospheric Drain
Note
Ensure there are no kinks in the tub-
ing that could restrict water flow.
Figure 11: External Unit Connections
Customer supplied fasteners
Figure 10: Remote Wall Bracket Mounting