Specifications

12
INSTALLATION
Coupling Insert
Push down on thumbpad
to release coupling insert
Coupling Body
Figure 4 Quick Disconnect
Note
The quick disconnect fittings contain
valves and if not properly inserted
water will not flow.
Quick Disconnect Fittings
These fittings are found on the water inlet. (See Figure 4)
To insert the inlet tubing:
1. Press on the metal thumbpad on the unit to
ensure the fitting is open.
2. Install the coupling insert into the coupling body
until you hear a click. Gently pull on the tubing to
ensure it is secure.
3. To remove, press the metal thumbpad to release
and pull coupling insert out.