Instruction manual

Chlorine can also damage your membranes, resulting in premature
membrane failure. Therefore, your Barnstead TII uses an extruded carbon
filter to remove chlorine from your feed water. Install the carbon filter as
follows:
1. Remove the carbon filter (Part Number D502115) from its packaging
and wet the o-rings with water.
2. Insert the carbon filter straight into the right position upper and lower
quick disconnect and push until firmly connected. For easier
installation, connect bottom first.
3-8 Type II Water System Thermo Scientific
Section 3
Installation
Carbon Filter
Installation
RO Membrane
Installation
Figure 3-9a. Schematic of the UV and RO Placement in the Barnstead TII.
(a) is FEED, (b) is PRODUCT, and (c) is REJECT.