Instruction manual

Type II Water System 3-1Thermo Scientific
Section 3 Installation
Remove the unit from its shipping container and ensure that the following
items are removed before discarding the packaging materials:
1. Barnstead TII unit
2. Drain Water Tubing. Approximately 6 ft. (1.83 m) of 1/4” (0.64 cm)
O.D. drain tubing (TU1190X12) with no fittings (Fig 3-1)
3. Feed Water Tubing. Approximately 10 ft. (3.05 m) of 3/8” (0.95 cm)
O.D. feed water tubing provided with a quick disconnect insert on one
end and a 1/4” NPT fitting on other end (TU1119X7) (Fig 3-2)
4. Reservoir Connection Tubing. Two approximately 10 ft. of 3/8” O.D.
tubes (TU550X5) for fluidically connecting the unit to the storage
reservoir (Fig 3-3).
5. Model D14041 only: Membrane Reject 1 to Membrane Feed 2 tube
6. Four power cords: one of which is pictured in Figure 3-4 with fuses.
7. UV lamp (LMX13)
 Drain Water
Tubing
 Feed Water Tubing
Reservoir
Connection Tubing.
 Power Cord with
Fuses.
Tube Removal
Tool.
Unpacking