User Guide

13
C
C
A
A
R
R
E
E
A
A
N
N
D
D
M
M
A
A
I
I
N
N
T
T
E
E
N
N
A
A
N
N
C
C
E
E
Care of String
The owners kit contains a tube of lube wax that should be
applied to the center serving and flight track every 5 – 10
shots. Lubewax should also be applied anywhere the cables
make contact with the Teflon tape or flight track every 20 – 30
shots. To extend the life of your cables it is important to apply
ARCHERY STRING WAX to all areas of the cables and string
every 30 - 50 shots or when white fuzz begins to appear. If the
crossbow has been exposed to excessive moisture you may
need to apply wax sooner.
PRIOR TO EVERY SHOOTING SESSION, IT IS
RECOMMENDED THAT A COMPLETE CHECK OF STRING,
CABLES, WHEELS, SCREWS AND ARROWS BE MADE.
• Always store your crossbow in a safe, dry place.
• Do not expose your crossbow to extreme heat,
such as closed, hot vehicles or near heat sources.
• Inspect cables and strings for signs of wear.
Cables showing wear should be replaced
immediately by an authorized service center or the
factory.
• Periodically put a few drops of quality lightweight
machine oil in the trigger mechanism.
• Periodically lubricate the eccentric wheel axels
with lightweight machine oil.
• Keep the flight track and the string serving waxed,
reducing friction.
• Your prod can be left strung indefinitely although
we do not recommend that the bow be left in the
cocked position for periods longer than four hours.
With reasonable care of your equipment and diligent practice,
your crossbow will remain an accurate, highly efficient hunting
weapon.