Spec Sheet

Submersible Grinder Pumps
SECTION
PAGE
DATE
USA: [phone] • Canada: [phone] • International: [phone]
A Crane Co. Company
1
www.cranepumps.com
E
Professional Plumbing
8/16
Series PGPT
Specifi cations:
DISCHARGE ................................1¼” NPT SCH 80, 300 Series SS
CHECK VALVE ............................1¼” NPT Cast Iron
Style ........................Flapper with Integrated Anti-Siphon
LIQUID TEMPERATURE .............104°F (40°C) Continuous
MOTOR HOUSING ......................Cast Iron ASTM A-48, Class 30.
SEAL PLATE ..............................Cast Iron ASTM A-48, Class 30.
SUCTION CASING ......................Cast Iron ASTM A-48, Class 30.
IMPELLER ................................Stainless Steel
SHREDDING RING .....................Hardened 440C Stainless Steel
Rockwell® C-55.
CUTTER ......................................Hardened 440C Stainless Steel,
Rockwell® C-55.
SHAFT ........................................416 Stainless Steel
SQUARE RINGS .........................Buna-N
O-RINGS ......................................Buna-N
HARDWARE ................................300 Series Stainless Steel
PAINT ...........................................Air Dry Enamel
SEAL: Design ....................Single Mechanical
Material ...................Rotating Face - Silicon Carbide
Stationary Face - Silicon Carbide
Elastomer - Buna-N
Hardware - 300 Series Stainless
CORD ENTRY ..............................20ft. (6m) Cord with Plug, Custom Molded
Quick Connect for Sealing with Strain
Relief.
CORD:
Type ........................14/3 CSA/UL Approved SOW
SPEED: ........................................3450 RPM, 60Hz
UPPER BEARING:
Design ....................Single Row, Ball, Oil Lubricated
Load .......................Radial
LOWER BEARING:
Design ....................Single Row, Ball, Oil Lubrication
Load ........................Radial & Thrust
MOTOR:
Design ....................NEMA, Oil-Filled,
Squirrel Cage Induction
Insulation ...............Class F
Type ........................Capacitor Start/Capcitor Run
LEVEL CONTROL:
A Series ..................Pipe Mounted, Piggy-Back Mechanical
with 240V Plug
OPTIONAL EQUIPMENT .............Additional cord
Series: PGPT
1HP, 3450RPM, 60Hz
DESCRIPTION:
GRINDER PUMP DESIGNED TO REDUCE
DOMESTIC SEW
AGE TO A FINELY GROUND
SLURRY.
Patent Pending
I&O Manual