Submittal Sheet

State Supply ■ Toll Free: 800.772.2099 ■ Fax: [phone] ■ E-Mail: [e-mail]
A - 27
Copyright 1987-2007 State Supply
Barnes & Jones Straight-Through F&T Traps
Pipe
Size
Models
A B C
1/2 - 1” FTI-2015 5” 6-1/4” 6-1/2”
1/2 - 1” FTI-2030 5” 6-1/4” 6-1/2”
1/2 - 1” FTI-2075 5” 6-1/4” 6-1/2”
1/2 - 1” FTI-2125 5” 6-1/4” 6-1/2”
FTI Trap Dimensions
Pipe
Size
Model
No.
1 lb. 2 lb. 5 lb. 15 lb. 20 lb. 30 lb. 40 lb. 50 lb. 75 lb. 100 lb. 125 lb.
1/2 to 1” FTI-2015 513 683 824 1129 — — — — — — —
1/2 to 1” FTI-2030 513 683 824 1129 1271 — — — — — —
1/2 to 1” FTI-2075 294 383 546 835 919 1019 1176 1292 1523 — —
1/2 to 1” FTI-2125 184 242 347 525 593 698 788 872 1019 1166 1249
Pressure Differential and Pounds per Hour of Condensate Discharge
Complete Traps FTI Traps Related Repair Parts
Model
No.
Pipe
Size
Maximum
Pressure
FTI TRAP
ORDER
NO.
Head
Assembly
Air
Vent
Cover
Gasket
FTI-2015-2 1/2”
15
BC2195 BD2400
BD1023A
FTI-2015-3 3/4” BC2200 BD2410
FTI-2015-4 1” BC2205 BD2420
FTI-2030-2 1/2”
30
BC2210 BD2430
FTI-2030-3 3/4” BC2215 BD2440
FTI-2030-4 1” BC2220 BD2450
FTI-2075-2 1/2”
75
BC2225 BD2460
FTI-2075-3 3/4” BC2230 BD2470
FTI-2075-4 1” BC2235 BD2480
FTI-2125-2 1/2”
125
BC2240 BD2490
FTI-2125-3 3/4” BC2245 BD2500
FTI-2125-4 1” BC2250 BD2510
HL1574
The FTI Head Assemblies
include all the replacement
parts (float & mechanism, air
vent and cover gasket) pre-
assembled on a new cover.
All you do is un-bolt the old
cover, bolt-on the new one,
and you’re done.
The FTI traps are often used to replace inverted
bucket traps in steam heating systems: The air vent
in the FTI trap allows it to discharge significantly
more air than a traditional bucket trap. Important at
start-up on a low-pressure steam heating system.
FTI traps are also used to replace the
Illinois model 6G (3/4”) and 7G (1”)
float and thermostatic steam traps.
Straight-Thru Piping
Head
Assembly
Head
Assembly