Specifications

1. Whensettingcameraparameters,pleaseputcamerainSetupmode.
2. DonotsetthecameradirectlyfromONtoSetup.
3. Toreplacethebattery,SDcard,andSIMcard,firstlyturncameratoOFFmode.
4. ColorofIndicator
1) Whencameraisupdatingfirmware,indicatorlightflashesgreen.
2) Theindicatorlightflashesredwhenitisturnedonorreadyforoperation.
3) lowbattery,theindicatorlightflashesblue.
4) longstandbytime,theindicatorflashespurple.
5. Batteriesneedtousedrybatteries,donotuserechargeablebatteries.
6. WhentheSDcardisinsertedintocamera,makesurethattheSDcardisnotinlockstate.
7. Whenusinganexternalpowersupply,makesurethatvoltageis12V.
8. Pleasetakeoutthebatterytoavoidleakageofthebatteryifcameraisnotusedforalongtime.
9. Cameracannotbedirectlyimmersedinwater,cannotbeplacedintheenvironmentofstrongacidandalkali.
10. Don’tuseyourfingerstopresstheFresnellens.
11. Keepthelensandbatterycompartmentclean.
12. Donotusesharphardobjectstoscratchscreen.
3
NotesBeforeUse