Installation Guide

BarMate Installation Guide
vii
About This Guide
Purpose and scope
The purpose of this guide is to introduce the BarMate system and to help you
successfully setup and install this product. The scope of this guide describes the BarMate
System, components, and capabilities, and provides instruction for installing, setting up,
operating, and verifying installation and operation of the system once installed.
Audience
This guide is intended for trained BarMate Installers. It is assumed that installers have
been trained, and have a basic understanding of the BarMate System and installation
process when installing a system.
Organization
The following table is a roadmap to using this guide efficiently.
Refer to… To…
Chapter 1, The BarMate Overview Understand the BarMate System and how it
functions
Chapter 2, Installation Install the BarMate system components
Chapter 3, Management Centre Setup and
Operation
Setup and operate the BarMate software.
This section also describes how to upload
and configure maps, calibrate a SAM, and
configure an SRD.
Appendix A, BarMate Site Survey See an example survey
Appendix B, Specifications Understand cable wiring and pinouts
Acronyms See a list of the acronyms used in this
guide and the words they represent.
Related information
Use this guide in conjunction with a completed BarMate site survey. The site survey form
is located on page 4 of this guide.