Installation Guide

Chapter 2 Installation
38 BarMate Installation Guide
Disconnecting an SRD from a Bracket Mount
Removing an SRD from its Bracket Mount for remounting or
replacement is easy using proper tools.
A slotted screwdriver with a 1/8” tip.
To remove an SRD from its Bracket Mount
1 Insert the screwdriver into the Disconnect Slot on the
side of the SRD.
Figure 26: Disconnect slot on the SRD.
2 Insert screwdriver and apply slight forward pressure
towards the SRD with the screwdriver, while sliding the
SRD upward.
Disconnect Slot