Installation Guide

Chapter 2 Installation
BarMate Installation Guide
33
Installing SRDs
The SRD contains an internal battery that is magnetically
activated when the SRD is attached to the Bracket Mount.
The internal SRD battery is not replaceable. To protect
internal electronics, the SRD case is hermetically sealed.
CAUTION:
Trying to open the SRD case will likely break the device,
and the device will no longer be water resistant.
SRD orientation
The SRD includes an internal antenna, which must be in a
vertical position when the SRD is mounted to a surface. The
SRD must also be oriented so that the LED is located on top
so that servers are able to quickly identify a service request.
See Figure 19.
Figure 19: Orientation of SRD when installed.
SRD attachments
The SRD can be mounted to a surface using an adhesive,
screws, or zip ties, or a combination of these attachments.
SRD attached
to side of
lounge chair
so internal
antenna is
vertical
LED is located
on top