Installation Guide

Chapter 2 Installation
30 BarMate Installation Guide
Mounting the SAM
The SAM can be mounted using the included brackets. The
following procedure describes how to attach the brackets
and mount the SAM.
To attach mounting bracket
1 Attach the three mounting brackets to sides and bottom
boss locations on the back of the SAM.
Figure 16: Bosses on the SAM cover.
2 Mount SAM to fixed object (refer to BarMate site survey
for location and object).
Connecting the Antenna Array, COM Antenna, and
Solar Panel
The antenna array, COM antenna, and solar panel should be
mounted before they are attached to the SAM. The site
survey should indicate the cable lengths needed to connect
the antennas and solar panel to the SAM. The following
procedure describes how to connect the antennas and solar
panel to the SAM.
Back of SAM
Bosses for
mounting
bracket