Installation Guide

Chapter 2 Installation

BarMate Installation Guide

Figure 11: COM antenna base.

3 Insert antenna into mounting bracket and secure with

washer and antenna mounting nut. Do not over tighten.

Figure 12: COM antenna and mounting bracket.

4 After the COM antennas are mounted and their

associated devices (SAM and Gateway) are installed

and operational, connect the COM antennas to their

respective devices. For information about installing the

devices, see “Installing Gateway” on page 4 and

“Installing a SAM” on page 4.

Antenna

Bracket

U-bolts

Pole

Antenna

Mounting Nut

Washer