Installation Guide

Chapter 2 Installation
16 BarMate Installation Guide
Installing the BarMate software
The following procedure describes how to install the
BarMate software from a CD.
To install the BarMate software
1 Insert the BarMate CD into the Master Management
Centre computer’s disk drive.
2 From the Windows Start key, select Run.
3 In the Run dialog box, type D:\BarMateSetup.exe
and click OK.
The setup utility begins to install the BarMate
Management Centre (MC) application. An icon is placed
on the desktop and a BarMate menu option is inserted
on the Windows Start menu.
Launching the Management Centre Application
After the BarMate software is installed, you can launch the
Management Centre application.
To launch the Management Centre application
1 Click the BarMate icon on the desktop, or click the
Windows Start menu and select Programs > BarMate.
A prompt displays asking if you want to configure the
Management Centre.
2 Select one of the following options:
a. To configure the Management Centre at a later
time, click No. The Management Centre’s Map
tab displays.
b. To configure the Management Centre now, click
Yes. See “Setting up the Management Centre”
on page 4.