Instructions / Assembly
Page 11User’s Manual
VW401P
Post-Installation Adjustments
Maintenance and Servicing
1) Push evenly in the front of the VW401P to release
the single latch spring lock (Figure 1).
2) Slowly pull the front of the VW401P to extend the -
scissor arms (Figure 2).
3) Loosen the locking safety screws on both mounting
brackets.
4)
kickstands against the bottom of the mount
(Figures 2 & 3).
maintenance and servicing or replacement. After
servicing, make sure the spring lock is locked again
in the mount's closed position.
Figure 1
Latch
Spring Lock
adjustments +/-Y
X
Z
Y
screen
Raise slightly the bottom
of screen before adjust
adjustments +/-X
adjustments +/-Z
adjustments +/-Z
Figure 2